Tunnel pasteurizer forpasteurizing beer, juice, carbonated drink
This Tunnel Pasteurizer mainly consists of three sections: heating
section, constant temperature section and cooling section. Bottle input conveyor transfers full bottles onto mesh belt from bottle input conveyor. All bottles in the machine are arranged in order
and pass through three sections one by one, and achieve
requirements of processing technology. At last, bottle output
conveyors transfer bottles to discharging chain. Following is
description about three sections.
Water heating section
There are three separated water tanks in this section. Water is
preheated in these tanks by steam. Hot water is pumped into nozzles
above mesh belt by spray pump, and atomized onto full bottles.
Temperature on bottles is raised gradually in order to reduce loss
of flavor in liquid product influenced by high temperature.
Recycled water returns to water tanks.
Constant temperature section (sterilizing section)
This section is sterilizing section, which temperature can get 65℃ (you can adjust the temperature according to sterilization
demand). It is also a constant temperature section. There is one
water tank, and water is heated to sterilizing temperature by
steam. Hot water is pumped to nozzles above mesh belt, and atomized
onto full bottles. A Temperature Control System controls water
temperature automatically. Working principle of this system is to
regulate flow rate of steam into this tank with a pneumatic
membrane valve, on the base of temperature difference detected by
temperature control instrument. You could regulate infinite Speed
Reduce to change running speed of mesh belt, in order to change
This section consists of warm water cooling-area and cold water
cooling-area. The water tank is under cold water cooling area.
Temperature on bottles is dropped gradually. Cold water is pumped into nozzles above mesh
belt and atomized onto bottles. This is the final cooling
procedure. Recycled water from this area is heated into warm water
and is pumped to warm water cooling-area. This is the first cooling
Product Main Technical Data
Bottle inlet temp.( ℃)
Bottle outlet temp.( ℃)
Sterilizing temp.( ℃)
62-63(Can be adjusted as the request)(85℃-92℃)
10min(Can be adjusted as the request)
0.5-0.6MPa saturated steam
Width of belt(m)
≥0.2MPa,water temp. is 20 ℃